頁面主標題

PP Tape Line Making Machine -TLM  Series
PP Tape Line Making Machine -TLM  Series
PP Tape Line Making Machine -TLM Series
TY-TLM100-1100-192ST1
Feature&Advantages


The extruder unit is equipped with a belt type screen filter changer and rotary type slitting unit for none-stop operation
. T-die built with steel from Germany BUDERUS with Daido standards PDS-5 AISI standards PP120. Oven stretching device use two-layer blower design and heat circulation for energy saving and stretching tension. The pressure roller of take up, stretching, and annealing is pneumatic controlled, and have linkage synchronize controlled electronic system. 

The PP/HDPE extrusion line can incorporate with Italy-made gearbox, T-die, melt pump, and Maguire blender. Tape winder provide special customization, and design for making 500-1500 denier and working speed from 100-400 meter/minute.

  • Oil pressure automatic screen filter change
  • Energy saving device with double-layer heat flow circulating oven, and automatic temp controller to keep stable temp cycle
  • The annealing roller and stretching roller use temp control of heat oil and cooling water circulation system to finalize the annealing and stretching
  • Machine linkage operation with H.M.I program and PLC interface control, simple operation reaches high efficiency
  • T-die comes standard with thermal insulation and Automatic T-die for customer option
  • Providing Maguire automatic blender, cooling water system, air compressor, thickness measurement system as optional equipment
  • Use Germany Siemens and Japan Fuji electronic components and good service
Production line speed: 100-400 M/MIN, Capacity: 420-650KG/HR
Feature
Auto screen change
Auto screen change
MAGUIRE automatic blender
MAGUIRE automatic blender
Thickness measurement system
Thickness measurement system
Inverter Winder
Inverter Winder
Non-stop design of 5 sets slitting knife with swing device
Non-stop design of 5 sets slitting knife with swing device
FARCON Metering pump (optional)
FARCON Metering pump (optional)
Specification

Item/model

TY-TLM110-1100-192ST1

TY-TLM120-1300-216ST1

TY-TLM130-1500-252ST1

Max. CAPACITY

420KG/HR

520KG/HR

650KG/HR

SCREW DIAMETER

110MM

120MM

130MM

LINE SPEED

400M/MIN

400M/MIN

400M/MIN

T-DIE WIDTH

1100MM

1300MM

1500MM

DENIER

600-1000

600-1000

600-1000

STRETCHING STEP

1

1

1

AUTO TENSION TAKE-UP WINDER

192pcs

216pcs

252pcs

Industrial application
Detailed introduction
*
TY-TLM SERIES
This equipment was design for special screw and dosing material,reduce the waste.high efficiency and high quality.Special design for take up roller and remove water equipment,high speed was dry.Non stop in slitter Six sets for Gravimetric Batch Bladers and move bar,extend the blade use time.Thinkness measurement system was optional equipment,it can keep the denier quality and stable,.HMI setting temperature and speed,PLC to controller.Automatic increased speed,Reduce,operational easy.
*
TY-TLM SERIES
This equipment was design for special screw and dosing material,reduce the waste.high efficiency and high quality.Special design for take up roller and remove water equipment,high speed was dry.No stop in slitter Six sets for Gravimetric Batch Bladers and move bar,extend the blade use time.Thinkness measurement system was optional equipment,it can keep the denier quality and stable,.HMI setting temperature and speed,PLC to controller.Automatic increased speed,Reduce,operational easy.
TERNG YIH MACHINERY CO., LTD